Cyclone has 3 styles of custom wave boards in the range for 2008. All boards are hand shaped and vacuum glassed , finished with 2K epoxy hand crafted graphics.
Cyclone Custom Wave Quad Series Sizes : 5ft6 , 5ft8 , 5ft10 6ft and 6ft2Tail : Sqaush or Swallow
Construction : Epoxy vacuumed polyester core with composite / kevlar top sheet layup . Fins are fibreglass
handcrafed FCS type set up . Single to double concave .
User :The Qaud fin was designed for all round use and is especially at home in onshore mushy conditions. It is also a favourite of mine whilst surfing backhand , this is mainly due to the Quad being a lot looser and easier to slide the tail out through the turns . The sqaush tail will allow for a bit more forgiveness whilst the swallow tail will give a little more bite . This board is perfect for the first time user coming across from the TT.
Cyclone Custom Wave 5 fin comp Sizes : 5ft6 , 5ft8 , 5ft10 6ft and 6ft2
Construction : Epoxy vacuumed polyester core with composite / kevlar
top sheet layup . Fins are fibreglass handcrafed FCS type set up . Single to
double concave
User : Everyone. Allowing for 3 different fin configurations this is the
genuine all rounder . Without having to compromise you can change the
performance of the board to suit the conditions . The difference being
that when in 5 fin mode the board will be able to be pushed to the max
in the strongest winds and biggest waves . Awesome upwind ability and
yet super fast.
Cyclone Custom Wave Thruster seriesSizes : 5ft6 , 5ft8 , 5ft10 6ft and 6ft2 : Squash Tail
Construction : Epoxy vacuumed polyester core with composite / kevlar top
sheet layup . Fins are fibreglass handcrafed FCS type set up .Single to
double concave
User : The Thruster was designed for those clean down the line carving
conditions , allowing for max pressure through botttom and top turns . No
sliding the tail out through those gouges , just rock solid full throttle
carves.
Download the PDF here